Home » Healing Arts » How to Construct Your Own Hot Tub Enclosure

When you want to install a hot tub inside your home, in order to have it looking its best you should build a hot tub enclosure around it. Now you can purchase hot tub enclosures, but you will enjoy relaxing in the water when you know that you completed this job on your own. This makes the enjoyment of it that much better. Even if you are not an experienced carpenter, there are many kits you can buy to help you complete the job.

The first thing you have to do in building a hot tub Tub Enclosure Guys is to get the precise measurements of the tub. Just because the hot tub is circular or triangular in shape doesn’t mean that you have to build the enclosure in this shape. A hot tub of any shape will look great in a square or rectangular shaped enclosure. This will give you plenty of room to sit on the side or have a place to lay your towels.

If you are building hot tub enclosures without a kit that comes with all the materials you need, you can get advice from the staff at your local building supply store. You will need to purchase four 4×4’s for the corners. These will be the posts of the enclosure, but you will need to cut them for the height of the enclosure. Eight pieces of 2×4 are needed for the sides and you will need to have these long enough to match the measurements of the diameter of the tub.

It is important to use only pressure treated wood when building a hot tub enclosure. Measure everything twice before you make any cuts to avoid mistakes and having to make additional purchases because of this. Use decking screws to assemble the pieces to form a box around the tub.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source

About

Leave a Reply

Your email address will not be published. Required fields are marked *