Home » General Health » How to Install and Care for Natural Stone Tiles

Natural stone tiles may not be the easiest material to use and maintain for walls and flooring, but they are certainly one of the most rewarding both in terms of quality, and also return on investment since it is widely believed that a natural stone wall or floor will increase the value of your property. In addition to these benefits, natural stone tiles also are extremely hard wearing, and in most cases, with some care and attention, will last as long as the house does.

As already mentioned, there is perhaps more work involved both in fitting and maintaining Natural Stone Tile Guys than there is in some alternatives such as wood flooring. One reason for this is because stone is a very strong material that is more difficult to cut than a wood board, or even a ceramic tile, which would be scored and snapped. In addition to this, you may need to prepare the surface of the sub floor upon which your tiles will be laid if it is uneven or cracked. This can be done in most cases with a good quality self leveling compound, available from all respectable tile and flooring specialists.

When it comes to cutting natural stone tiles, the best way to do this is with an electric tile wet cutter. In addition to stone tiles being quite thick and strong, they are also a natural material and will therefore by nature have veins and faults in it, making it unsuitable to be cut using a manual tile cutter, which would be more likely to shatter the tile as opposed to snap it. Be aware that wet cutting can be messy and create significant amounts of dust and debris; therefore try to either perform the cutting outdoors, or in a safe environment. Always take care to wear hand and eye protection as well as suitable clothing, and remove and power sockets or electrical equipment that is likely to get wet in the process.

When marking a cut line on a natural stone tile, you may prefer to use a crayon as opposed to a pencil which is likely to not make a significant mark on the tile. Take care to go extra slow when reaching the end of your cut, as if you go too fast and force the tile through it is likely to break rendering it difficult to use. If you are cutting a particularly large tile, try to get someone to help you steady the tile as you cut, since the weight of either piece of tile can start to pull the whole piece apart encouraging a snap as you advance through the tile.

Laying your natural stone tiles is a relatively simple process involving the use of tile adhesive to fix the tiles to the surface. Some types of particularly porous tile such as travertine require ‘back-buttering’ with tile adhesive before they’re laid. This is also important if your tiles have any cracks in the underside, since ‘buttering’ will help to seal the crack and add strength, and the process is considered good practise in any situation. Take care when laying natural stone tiles, as they can be quite heavy. Take care to minimise unnecessary stretching to reduce the risk of back strain. You can use a spirit level to help check your tile is level before moving onto the next one, and a gentle tap from a small mallet can help to encourage any corners that are too high.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source


Leave a Reply

Your email address will not be published. Required fields are marked *