Home » Build Up Muscle » How to Restore Concrete Floors

What is all the talk about Polished Concrete Floors Polishing and grinding concrete floors has been a topic of discussion over the past few years, and I’ve been asked so many times what it’s all about, that I decided to write this article. Hard surface floors have been around since the time of the Roman Empire. It took an enormous amount of labor, and a lot of ingenuity to split large stones, and hone them down to make slabs suitable for flooring in buildings.

The mixtures have been tweaked over the years, but the process has virtually remained the same. Contractors have used different curing agents, have implemented the use of steel bar to hopefully prevent concrete from cracking, and have implemented different types of moisture barriers to improve on the finished product.

Building owners have wanted different types of flooring over the Poured Concrete Wall Guys to give a building a warmer, and cleaner feel. In industrial facilities they have used tile, rolled linoleum, floor paint, or epoxy to give a building a more desirable appearance, and make it easier to clean than bare concrete. That works for a while, but everyone of those products eventually wears out and requires replacement. That brings us up to the present time.

Abatement is a tedious, and time consuming process, but it has to be done, before you can begin the process of restoring the concrete floor underneath. You cannot do it yourself! Asbestos Abatement requires countless hours of training, certification, annual re-certification, special equipment, and people who are crazy enough to want to do it. Just kidding! Luckily, there are people who enjoy that type of work, and take pride in providing an excellent finished product.

Due to the cost of the abatement, and the fact that they will need to tent off areas while the abatement is going on, there will be some need for some logistical planning. What you don’t want to do is put it off, hoping the problem will cure itself, or go away. That’s not going to happen. It doesn’t happen that often, but I have seen instances where the inspectors come in and demand that the problem is corrected before the building can be used again.

Next you go to a little finer set of grinding stone to continue the grinding/leveling process. You go in straight lines in a defined area to make sure each section of floor is ground evenly. All floors will require overlapping with the machine. Some will require changing direction with the machine to level the floor properly. All floors will require edging up against walls and in doorways to grind and level the floor adequately. All of this requires floor technicians with a pretty significant amount of experience and training to do the job the right way.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source

About

Leave a Reply

Your email address will not be published. Required fields are marked *