Home » Beauty Solutions » Tips on Stretching it the Right Way

This is a procedure that is used in two different cases: when you first install your carpet and when you need to repair it. During the installation, the stretching basically makes sure that you are left with a very secure and smooth carpet that covers your floor. Basically it will allow it to sit flat against the flooring.

When you need to do carpet stretching, you have to work with a carpet stretching tools, such as a carpet stretcher, a knife, a staple gun, a stair tool, an awl and a hammer. The most important tool to be used is the carpet stretcher.

Before you do the repair or stretching job, you need to first make your due diligence. For example not every stretching method is good for all carpets. Some required a different method than others. Learn what works best for your type. If you still have the installation instructions, read through them as it might be mentioned. If you use the wrong method, you might end up damaging the carpet in the process.

First make sure that all furniture from the room is placed someplace else, as the carpet stretching service to be empty. Then find out the direction that you need to stretch the carpet towards. Usually it needs to only be done in one direction, as you can easily get away with it.

Next remove metal strips that might be on the floor. Pay attention as some have nails that need to be removed as well. If the strip is clamped down, all you need is lift it with a stair tool or even a flat chisel. Then use an awl to lift one edge of your carpet and poke the awl through it at around 6 inches away from the wall. You could also use some pliers instead of an awl.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source

About

Leave a Reply

Your email address will not be published. Required fields are marked *