Home » Anti-Aging Teartments » Fast and Effective Tips for Repairing Horizontal Blinds

There are multiple horizontal blinds available in the market that can be used to cover up the windows and ensure maximum privacy in the houses. They are made from aluminum, fabric, vinyl, faux and other materials. They are easy to be maintained, but since the users turn or adjust them continuously, they expect that they would break down easily. This article will highlight on the essential tips that the users should follow to repair these items in the best possible way.

The first step is to pull these old slats as well as blinds repair the new slats when they are broken down. The caps are placed under the rail or metal piece at the bottom part of blinds along with a screwdriver. You should cut end parts of cords along with a pair of scissors. The second step is to pull out strings of holes until the slats are broken down. You should then slide these strings as well as push them in the right place. The next step is to thread these cords through the slats. You should then push these caps in the right place.

You should replace cords in blinds if they are damaged. You should pass the plastic plug below the bottom rail. You should then pull the cords through openings of the rail. You should then cut down the end part of cords along with a pair of scissors. You should also tie knots in the cords at appropriate length.

The next step is to move these blinds out of wood blinds repair from the window when the cord lock is damaged and they are not moved easily. You should pull the end portion of brace from head rail along with pliers. You should then locate lock mechanism of the cord and you should use a screwdriver in a pin in the lock mechanism as well as push it as much as possible. The final step is to place the cords so that they remain smooth and flat on the head rail while these blinds still remain on the surface of the window.

While the horizontal blinds repair may not seem to be expensive, chances seem to be quite high that a little bit of restringing is sufficient in order to keep in good condition for a long period of time. In order to restring the blinds, it is advisable to pull out the cord as well as cut out the cord in appropriate size. The next step is to hold the old and new cords together so that they touch as well as fuse these pieces together by holding one lighting stick to these ends and gluing them with heat emitting from the same stick. You should then tie a knot in the end part of the bottom rail when the cords are cut down and when you are convinced that you would not snip the same knot with your pair of scissors.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source


Leave a Reply

Your email address will not be published. Required fields are marked *