Home » Beauty Solutions » Chimney Sweep Tools for Fireplace Cleaning

Creosote is a flammable substance which builds up on the walls of a chimney. Build-up of creosote reduces the draft needed by the fireplace which in turn may cause smoke and fumes to come out the door and into the room. Creosote is flammable and can easily fuel a chimney fire. Using creosote and soot inhibitors is the best way to prevent creosote buildup. However, experts recommend cleaning the chimney once a year to remove debris and to prevent fires. Fireplaces also need to be cleaned regularly to remove ashes and soot which builds up each time a fire is burned.

Chimney brushes are the number one tool professional chimney cleaners use to remove the soot and creosote from the walls of the chimney. These brushes come in a variety of sizes. The correct size of the brush is important as it cannot be too small or too large for the size of the chimney. If too large, it may get caught in the chimney making it difficult to move the brush back and forth. If it is too small, it will not provide enough pressure on the walls of the chimney to remove the debris. Chimney brushes come in round, square, and rectangular shapes. They have stiff open bristles which are great for scraping the sides of the chimney.

The brushes are attached to long fireplace cleaning allow cleaning of the whole length of the chimney. Chimney rods are usually three-foot long fiberglass sections which can be attached to each other and then attached to a brush at the end. Both the spiral brushes and the extension rods are for chimney cleaning only and are not appropriate to use in the fireplace itself. The rods are made to be used from the top of the chimney down and the brushes are larger in size and very strong bristled so they would be difficult to maneuver inside a fireplace.

A scratch and scrape wire brush can be used to gas fireplace cleaning side of the chimney where the cleaner can reach as well as to clean the inside of the fireplace. This tool removes accumulation of creosote by hand scraping it off. This is a good tool to be kept near the fireplace for occasional scraping of creosote off the insides of the bottom of the flue as well as scraping on the damper. A scout brush is a two-foot long poly-bristled brush which is great for cleaning the smoke chamber as well as the inside of the fireplace. It can also be used along with brick or mortar cleaners to remove soot. This brush is made to be used in the fireplace and would not be helpful to clean a chimney.

A wire duster brush can get into all the nooks and crannies either in the fireplace or in areas on the top and bottom of the chimney where the cleaner can reach. It has strong wire bristles which can scrape away stuck on creosote. A Millbury brush is specially made to sweep up ashes and soot on the floor of the firebox. It is a little longer than a foot and has fine bristles that easily catch the debris. This brush is only used for the fireplace itself.

Fireplace cleaning is essential for burning quality fires. Air needs to be able to circulate all around the wood and too much soot or too many ashes in the firebox prevents the air from getting under the wood. Thus, the fire may be slow to burn or may not burn at all. A simple set of fireplace tools specially made to clean only the fireplace is a good option. A poker, shovel, broom, and set of tongs will be helpful in keeping the fireplace free of debris.

Published at: Recent Health Articleshttp://recenthealtharticles.org

Article Source


Leave a Reply

Your email address will not be published. Required fields are marked *